So first cleaning results may vary, because OptiMax is a mild cleaner, and it cleans in a different manner than what you may be accustomed to.

This is especially true if other cleaners have been used in a previous cleaning attempt, which is usually the case.

Therefore, a second and third application is recommended initially, in order to properly remove what other cleaning agents leave behind from the surface area, to truly clean atomically.

Depending upon the type of material being cleaned and the amount of dirt on the surface area, it is advisable to spray on a heaver mist initially & wipe with premoistened material in an effort to remove the bulk of the dirt first, then use lighter applications for the 2nd, 3rd and or final cleaning.

Additionally, a light even mist achieves ideal results for final cleaning. The push button sprayer puts out a very fine mist. For final cleaning, its best to hold the substrate several inches away from the spray nozzle, so that the coverage will be a more uniform fine mist.

Use Opti-Max Wipes or Optex Polish Cloth to wipe the surface area until completely dry.

If very precise, critical cleaning is required, follow the above and clean your surface until you can clearly see, and feel that the surface is entirely dirt free, then clean once more for a final cleaning step. This is needed sometimes because OptiMax cleans below the level of what the naked eye can see.

After following the above you will find that whatever you've cleaned will stay clean much, much longer, and all static electricity will be removed. Therefore, this cleaned item will no longer attract dust, and or dirt as readily as before.

Furthermore, when this item needs cleaning again, there will be less dirt and or dust to be removed, so less spray will be required to clean properly in the future.